Archives -

22
Jun

Finite Element Analysis of a UAV Wing

AeroVironment’s Global Observer is an unmanned aircraft with the wingspan of a Boeing 767 but less than 10% of the weight designed to provide communications and sensing for flights lasting up to one week at up to 65,000 feet. With a maximum wing loading of only 3.5 pounds per square feet, the wingtip deflects greater than 22 feet at its design limit load.

MSC Nastran was utilized to develop nonlinear stress, structural dynamic and aeroelastic finite element models. The structural dynamics model was correlated to a ground vibration test, both of which had to accommodate the apparent mass of the air, which is atypical. The ultimate test of the nonlinear stress model was correlation with the static wing load test.

21
Jun

Simulation of Bird Strike for Helicopter Component Certification

In the past, Sikorsky had to perform expensive bird strike test programs to certify helicopter components. These tests are expensive because they require building prototype components and testing them on a very elaborate rig. For example, the rig used to test the ability of a tail rotor to withstand bird strikes uses a hydrostatic drive ...
15
Jun

Structural Analysis and Model Validation for the James Webb Space Telescope ISIM Structure

The James Webb Space Telescope is a highly sensitive instrument that is positioned using a precise optical metering support structure. This supporting structure is made from composites to reduce thermal expansion effects while reducing weight. The instrument and structure are subjected to temperatures ranging from ambient during launch to cryogenic temperatures while in orbit. Dynamic and static loads are encountered during launch and in operation respectively.

14
Jun

Nonlinear Analysis in MSC Nastran to Reduce Design Bottlenecks

Sporadic use of advanced finite element analysis (FEA) software, such as nonlinear analysis by design engineers, can result in either excessive refresher training time or a bottleneck while in the queue for an analyst. The cause is a result of different types of solvers requiring different models. Commercially available translators can help, but still require significant amounts of cleanup. However, by integrating solvers in MSC Nastran’s SOL 600, the same model in the familiar MSC Nastran format can be used for both liner and MSC Marc nonlinear analysis.

10
Jun

Reducing the Product Development Time of a Rotary Cutter System Through Simulation

In the agricultural and heavy machinery industries, durability and strength are some of the most important indicators of quality. Maintaining high levels in these areas requires the application of many different tests and assessments to the end product. However, one of the most time-consuming parts of the production is the lengthy process of building physical prototypes, testing them for durability, then redesigning several parts and starting all over again. This process can significantly extend the time it takes to get a product to market. This was the case for John Deere Welland Works while developing a 20-foot rotary cutter system.

8
Jun

Schneider electric and Dupont – Stiffness of a Bracket in Reinforced PBT

Dupont Schneider electric and Dupont – Stiffness of a Bracket in Reinforced PBT   Customer: Schneider Electric Global specialist in energy management offerings integrated solutions for safe, efficient and reliable energy. Continuously exploring new technologies, developing new products and serving new markets.   Customer: Dupont Provider of wide range of innovative products and services for ...
Page 4 of 36
CLOSE
CLOSE